Storage device management – Wintal PVR10 User Manual
Page 34
34
WIN TA L P V R10HD USER M A NUA L
4. Press the
key to bring up the
SLIdEShow
and
ExIt
menu.
With
SLIdEShow
highlighted press
to begin the slideshow.
Highlight
ExIt
and press
to exit full screen mode and return to thumbnail view. Alternatively, press the
EXIT
key on your remote.
6. Storage devIce ManageMent
6.1 forMat Storage devIce
IMPortant: formatting your storage device will result in deleting all files.
Please take care when choosing this option and make sure you back up any important data. Please refer to section 4.8.5 “COPY
FILES” on how to copy and back up files between from the internal hard drive to an external HDD.
Select
MEnu
PVR
FoRMAt
and press the
key.
1. With
StoRAGE dEVICE
highlighted press
or the
key to pop up a drop-down list of available storage
devices that can be formatted.
2. Use the
and
keys to select the storage device you wish to format and press
3. Use to
key to highlight
ok
and press
to get to the password prompt.
4. Enter the local password (default password is 0000) to confirm.
Alternatively, you can also select
MEnu
SEtUP
StoRAGE dEVICE
and press the
key.
1. Enter the local password (default password is
0000) to confirm.
2. Use the
and
keys to select
the storage device you wish to format and
press
3. Select
FoRMAt
and press
, a warning box pops up for confirmation.
4. With
ok
highlighted press
to complete the format operation. There will not password confirmation once
you press
as you’ve already entered the password to enter this screen in the first place.
note:
In this screen you can verify free and used space for your storage device.