7 vlan – Westell Technologies Versalink 327W User Manual
Page 83

030-300500 Rev. A
83
October 2006
User Guide
VersaLink™ Gateway (Model 327W)
12.5.7 VLAN
The following settings will be displayed if you select VLAN from the Advanced LAN menu.
VLAN Enable
Factory Default = DISABLED
If this box is check, VLAN will be Enabled. This will allow VLAN
tagging to occur according to the data port’s configuration.
LAN Port
This allows you to select the LAN port that you wish to configure.
Possible responses are:
Ethernet Port 1
Ethernet Port 2
Ethernet Port 3
Ethernet Port 4
WLAN Port
VLAN ID
This allows you to assign a VLAN ID to the port.
Possible responses are:
1 through 8
VLAN Priority
This allows you to set the VLAN priority for the port.
Possible responses are:
0 through 7
Outgoing VLAN Tag
This allows you to keep or remove the VLAN tag on the port when data is
outgoing.