Westell Technologies Versalink 327W - Manual (Page 109)

030-300500 Rev. A 109 October 2006
User Guide VersaLink™ Gateway (Model 327W)
12.6.7 QOS
The following settings will be displayed if you select QOS from the Advanced WAN menu. If you change any
settings in this screen, click on save. If you click on reset, this screen will refresh and display your last saved QoS
configuration.
NOTE: The QOS feature helps ensure data integrity in high-speed transmissions. QOS provides the capability to
partition network traffic into multiple priority levels or classes of service. After packet classification, other QOS
features can be utilized to assign the appropriate traffic handling policies including congestion management,
bandwidth allocation, and delay bounds for each traffic class.
QOS Enable Factory Default = DISABLED
If this box is checked, Quality of Service (QOS) will be Enabled.
Turbo TCP Enable Factory Default = DISABLED
If this box is checked, Turbo TCP will be Enabled.
QOS Configuration
QOS Filter Enable Factory Default = DISABLED
If this box is checked, this will Enable the QOS filter.
QOS Classification This feature provides the capability to partition network traffic into multiple
priority levels or classes of service. After packet classification, other QoS
features can be utilized to assign the appropriate traffic handling policies
including congestion management, bandwidth allocation, and delay bounds
for each traffic class.