3 wan vc statistics – Westell Technologies Versalink 327W User Manual
Page 141
030-300500 Rev. A
141
October 2006
User Guide
VersaLink™ Gateway (Model 327W)
SNR Margin (db)
The Signal-to-Noise Ratio (S/N) where 0 db = 1x10
-7
, which inhibits your DSL
speed.
Line Attenuation (dB)
The DSL line loss.
Transmit Power (db/Hz)
The transmitted signal strength.
15.3.3 WAN VC Statistics
The following settings will be displayed if you select WAN VC from the Statistics menu.
NOTE: If VersaLink is configured using ETHERNET PORT 1, the following screen will not be available.
VPI/VCI
Displays the VPI/VCI values obtained from your Internet Service Provider.
In Errors
The number of error packets received on the ATM port.
In Discard Packets
The number of discarded packets received.
In Non Unicast Packets
The number of non-Unicast packets received on the ATM port.
In Unicast Packets
The number of Unicast packets received on the ATM port.
In Octets
The number of bytes received on the ATM port.
Out Errors
The number of outbound packets that could not be transmitted due to errors.
Out Discard Packets
The number of outbound packets discarded.
Out Non Unicast Packets
The number of non-Unicast packets transmitted on the ATM port.
Out Unicast Packets
The number of Unicast packets transmitted on the ATM port.
Out Octets
The number of bytes transmitted on the ATM port.
MTU
Maximum Transmission Unit -The number of data bytes contained in the ATM frame.
Interface Type
A unique identifier that represents the interface type.
Interface Description
A description field that refers to the interface type.
0/35