VIEWSONIC PJ650/PJ520 - Manual (Page 28)

OSD Menu Function Description
This device has 6 separate menus: MAIN, PICTURE 1, PICTURE 2, INPUT, SCREEN and OPTION. Each of
these menus is operated using the same methods.
The basic operations of these menus are as follows.
Main Menu
With the MAIN menu, the seven items shown in the Table below can be
performed.
Perform each operation in accordance with the instructions in the Table.
Menu screen display Press the "MENU" button.
Menu selection
Choose a menu name using the / button, and press
the button or the ENTER button.
Item selection
Choose an item using the / button, and press the
button or the ENTER button.
Return menu to last previous
screen
Press the button or the ESC button.
Execution of settings and/or
adjustments
Operate by using the / button. (For further details, read
the explanation for each separate menu.)
Initialization of settings and/or
adjustments During operation, press the RESET button. (Note that items
whose functions are performed simultaneously with the operation
of clock phase, language selection, automatic adjustment, etc.,
cannot be initialized.)
End menu operations Press the MENU button, or do not perform any operation for sev-
eral seconds.
Item Description
BRIGHT
Adjust Brightness: Light Dark
CONTRAST
Adjust Contrast: Strong Weak
ASPECT Select Aspect Ratio:
At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEO Input:
4:3 16:9
At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:
4:3 16:9 SMALL
The SMALL picture may not be displayed correctly with certain input signals.
PICT. POSIT. Select Picture Position (for 16:9/SMALL Picture):
TOP CENTER BOTTOM
GAMMA Select Gamma Mode:
NORMAL CINEMA DYNAMIC
MIRROR Select Mirror Status:
NORMAL H:INVERT V:INVERT H&V:INVERT
LANGUAGE Select Menu Language:
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL
ITALIANO NORSK NEDERLANDS
Рҏᇭ POTUGUÊS ϛМ
ViewSonic PJ650/PJ520 25