Setup reminders – VIEWSONIC PJ650/PJ520 User Manual
Page 12
SetUp Reminders
WARNING:
Precautions to observe in regards to the power cord: Please use extra caution when connecting the projector's
power cord as incorrect or faulty connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please
adhere to the following safety guidelines to insure safe operation of the projector:
•
Only plug the power cord into outlets rated for use with the power cord's specified voltage range.
•
Only use the power cord that came with the projector.
•
NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREEPRONGED PLUG!
•
Make sure that you firmly connect the power cord to the projector and wall outlet.
1 Connect your devices to the projector
Connect your computer, VCR and/or other
devices you will be using to the projector.
2 Insert the batteries into the remote control
.
3 Connect the power cord
(1) Connect the connector of the electrical power cord to the AC inlet of the main unit.
(2) Firmly plug the power cord's into the outlet.
Power cord
Power outlet
AC inlet
ViewSonic PJ650/PJ520
9