VIEWSONIC PJ650/PJ520 - Manual (Page 11)

Ports and Cables
Refer to this table to determine which projector port and cable to use for connecting to a given device. Use
this table for determining which cables to prepare.
NOTE:
About Plug-and-Play Capability
•
This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting this
projector to computers that are VESA DDC (display data channel) compatible. Please take advantage of
this function by connecting the accessory RGB cable to the RGB IN 1 port (DDC 1/2B compatible). Plug-
and-Play may not work properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e.
display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
• Plug-and-Play may not function properly with some type of computers. Use the RGB IN 2 port if Plug-
and-Play does not function correctly.
Function Projector Port Connection Cables
RGB input
RGB IN 1
Accessory RGB cable or optional RGB
cable with D-sub 15-pin shrink jack and
inch thread screws
RGB IN 2
RGB output RGB OUT
USB mouse control USB Accessory USB cable
PS/2 mouse control
CONTROL
Optional PS/2 mouse cable
ADB mouse control Optional ADB mouse cable
Serial mouse control Optional serial mouse cable
RS-232C communication Optional RS-232C cable
S-video input S-VIDEO IN
Optional S-video cable with mini DIN 4- pin
jack
Video input VIDEO IN Accessory audio/video cable
Component video input
COMPONENT VIDEO Y
Optional component video cable COMPONENT VIDEO C
B
/P
B
COMPONENT VIDEO C
R
/P
R
Audio input
AUDIO IN L Accessory audio/video cable or optional
audio cable with RCA jack
AUDIO IN R
ViewSonic PJ650/PJ520 8