Verizon 7500 User Manual
Page 88
030-300536 Rev. A
88
August 2007
User Guide
VersaLink Wireless Gateway (Model 7500)
If you select Bridge as the Protocol, and then select Routed Bridge from the Bridge Mode drop-down menu, the
following screen will appear. Enter the desired values in the fields provided, and then click Apply.
VC 1 – Bridge Protocol (Routed Bridge Mode)
DHCP Client
Allows you to either Enable or Disable the DHCP Client.
Select (enable DHCP Client) to obtain IP address automatically.
Select (disable DHCP Client) to use the static IP address that you enter into fields provided.
IP Address
The IP network address that your Router is on.
Subnet Mask
The subnet mask, which determines if an IP address belongs to your local network.
Gateway
The Router’s IP gateway address.
DNS Primary
This value is provided by Verizon.
DNS Secondary
This value is provided by Verizon.