Verizon 7500 - Manual (Page 162)

030-300536 Rev. A 162 August 2007
User Guide VersaLink Wireless Gateway (Model 7500)
Public LAN
Public LAN DHCP Server Enable Default = Disabled (deselected)
If this box contains a check mark, this enables DHCP addresses to be
served from the Public LAN pool.
Public LAN Enable Default = Disabled (deselected)
If this box contains a check mark, this enables the addresses from the
Public LAN to bypass the NAT interface.
Public LAN IP Address Provides a Public IP Address if the service provider does not
automatically provide one.
Public LAN Subnet Mask Provides a Public Subnet Mask if the service provider does not
automatically provide one.
If you clicked the Public LAN DHCP Server Enable box, the following screen will appear. Click the Public LAN
Enable box (a check mark will appear in the box).
WARNING: By enabling the Public LAN DHCP Server, you automatically disable the Router’s Private LAN
DHCP Server. (Private LAN DHCP is the default setting for VersaLink.)