Installation, Gett in g s ta rte d, Check battery indicator – VTech i6775 User Manual
Page 8: Check for dial tone

www vtechphones com
7
G
ett
in
g s
ta
rte
d
Installation
Check battery indicator
If you receive a check battery warning, it indicates one of the following:
1 There is no battery in your handset You need to install the supplied battery into your handset (see
Install handset battery on page 5 )
2 The battery needs to be replaced
3 The battery has been installed incorrectly Please reinstall (see
Install handset battery) and/or
see the diagram in the battery compartment of the handset
Check for dial tone
After the battery is charged, press
on the handset You should hear a dial tone If not, see
Troubleshooting
• Plug the AC adaptor
into an electrical outlet
If the battery has not
been charged,
place the handset in the
base or charger, and
or charger, and
, and
allow it to charge for at
least 16 hours
• Caution: Use only
the VTech power
supply provided with
your phone •
If the phone will not be
used for a long period of
time, remove the battery
to prevent possible
leakage
• If you have any trouble
installing your phone,
please refer to the
Troubleshooting
section near the end of
this manual
• When in low battery
mode, the keypad
sounds, backlighting
and speakerphone
features will not work
When the battery has
been charged, these
features will return to
their normal function