VTech i6775 - Manual (Page 29)

www vtechphones com 28
Answering system operation
Before using the answering system, you should follow the steps to set the day and time, so messages
are dated correctly
1 Press TIME/SET, the system announces the current setting
2 Press TIME/SET again
3 The answering system will announce the day of the current day setting Press CHANGE on
the base until you hear the correct setting
4 Press
TIME/SET, the system announces the current hour setting
5 Press CHANGE until you hear the correct hour
6 Press TIME/SET, the system announces the current minute setting
7 Press CHANGE until you hear the correct minute
8 Press TIME/SET, the system announces the current year setting
9 Press CHANGE until you hear the correct year
10 Press TIME/SET to confirm, the system will announce the new setting. You’ll hear a confirmation
tone
Pressing and holding the CHANGE button when setting the time and date will advance the minutes
or years by increments of 10
To check day and time
Press TIME/SET at any time to listen to the current setting without changing it
• You can choose
to set the
time manually
following the
instruction on this
page, or you can
allow it to be set
automatically with
incoming caller
ID information
Caller ID is a
subscription
service, fee
required
• In the event of a
power outage, the
day and time will
need to be reset