VTech Amplified Phone - Manual (Page 9)

www.vtechphones.com 6
Installation
Check for dial tone
After the batteres are charged, pck up the handset and press TALK/FLASH; you should hear a
dal tone . If you do not, refer to the Troubleshooting secton n the back of ths user’s manual .
Charge the handset battery
The battery may have enough power for short calls . Place the handset n the base, NEEDS
RECHARGING wll appear on the handset (f the battery s very low) . For best performance, charge
the battery for at least 16 hours before usng your telephone .
Language
• Press PROG, then press or untl LANGUAGE s dsplayed . Press SELECT .
• The current settng blnks . Press or untl the screen dsplays the correct language (Englsh,
Espanol and Francas) .
• Press SELECT to save your selecton .
Set the dial mode
If you have touch tone servce, the phone s ready to use as soon as the battery s charged . If you
have pulse (rotary) servce, you’ll need to change the dal mode .
• Press PROG.
• Press or untl the screen dsplays DIAL MODE: and the current settng .
• Press SELECT. The current settng blnks .
• Press or to select TONE or PULSE.
• Press SELECT to save .
• If the phone wll
not be used for a
long perod of tme,
remove the battery
to prevent battery
damage .
• If you have any
trouble nstallng
your phone, please
vst our webste at
www .vtechphones .
com .