Vivotek IP7133 (WIRED) - Manual (Page 78)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
78 - User's Manual
trigger boot,
di,
motion,
seq,
visignal,
pir,
recnotify,
audioswitch,
tampering,
iva
6/6 Indicate the trigger condition:
“boot” = System boot
“di”= Digital input
“motion” = Video motion detection
“seq” = Periodic condition
“visignal” = Video input signal loss.
“pir” = PIR detection.
“recnotify” = Recording notification.
“audioswitch” = Audio switch.
“tampering” = Tamper detection.
“iva” = IVA trigger.
di 6/6 Indicate which DI detects.
This field is required when trigger condition is “di”.
One bit represents one digital input. The LSB
indicates DI 0.
mdwin 6/6 Indicate which motion detection windows detect.
This field is required when trigger condition is “md”.
One bit represents one window.
The LSB indicates the 1 st window.
For example, to detect the 1 st and 3 rd windows, set
mdwin as 5.
mdwin0 6/6 Indicate which motion detection windows of profile
1 detect.
inter 1~999 6/6 Interval of snapshots in minutes.
This field is used when trigger condition is “seq”.
weekday 6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and
Sunday, set weekday as 66.
begintime hh:mm 6/6 Begin time of the weekly schedule.
endtime hh:mm 6/6 End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as always on)