Vivotek IP7133 (WIRED) - Manual (Page 50)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
50 - User's Manual
System log
This section explains how to configure the Network Camera to send system log to remote server
as a backup� It is composed of the following two columns: Remote Log and Current Log�
Remote Log
You can configure the Network Camera to send the system log file to a remote server as a log
backup� Before utilizing this feature, it is suggested to install a log-recording tool to receive
system log messages from the Network Camera� For example, a tool -- Kiwi Syslog Daemon�
Visit http://www�kiwisyslog�com/kiwi-syslog-daemon-overview/ �
Follow the steps below to set up the remote log:
1� In the IP address text box, enter the IP address of the remote server�
2� In the port text box, enter the port number of the remote server�
3� When completed, select Enable remote log and click Save to enable the settings�
Current Log
This column displays the system’s log in chronological order� The system log is stored in the
Network Camera’s buffer area and will be overwritten when reaching a certain amount�