Vivotek IP7133 (WIRED) User Manual
Page 77
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 77
uart_httptunnel
0/7
Indicate whether to support HTTP tunnel for
UART transfer.
transmission_mode
Tx,
Rx,
Both
0/7
Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
network_wire
0/7
Indicate whether to support Ethernet.
network_wireless
0/7
Indicate whether to support wireless.
wireless_s802dot11
b
0/7
Indicate whether to support wireless
802.11b+.
wireless_s802dot11
g
0/7
Indicate whether to support wireless 802.11g.
wireless_beginchan
nel
1 ~ 14
0/7
Indicate the begin channel of wireless
network
wireless_endchanne
l
1 ~ 14
0/7
Indicate the end channel of wireless network
wireless_encrypt_w
ep
0/7
Indicate whether to support wireless WEP.
wireless_encrypt_w
pa
0/7
Indicate whether to support wireless WPA.
wireless_encrypt_w
pa2
0/7
Indicate whether to support wireless WPA2.
derivative_brand
0/7
Indicate whether to support the upgrade
function for the derivative brand. For
example, if the value is true, the VVTK
product can be upgraded to VVXX.
(TCVV<->TCXX is excepted)
Group: event_i<0~2>
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
name
string[40]
6/6
Identification of this entry.
enable
0, 1
6/6
Enable or disable this event.
priority
0, 1, 2
6/6
Indicate the priority of this event:
“0” = low priority
“1” = normal priority
“2” = high priority
delay
1~999
6/6
Delay in seconds before detecting the next event.