Vivotek IP7133 (WIRED) - Manual (Page 47)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 47
HTTP: Select to send the media to a HTTP server when a trigger is activated.
■ URL: Enter the URL of the HTTP server.
■ User name: Enter the user name.
■ Password: Enter the password.
To verify if the HTTP settings are correctly configured, click Test� The result will be shown in a pop-up
window. If it works, you will also receive a test.txt file on the HTTP server.
When completed, click Save to enable the settings and then click Close to exit this page� The new server
name will appear in the server drop-down list on the application page as below� To remove a server
setting from the list, select a server name from the drop-down list and then click Delete� Note that only
when the server setting is not being applied to an event setting can it be deleted�