VIEWSONIC WPG-360 - Manual (Page 37)

ViewSonic WPG-360 30
4-5-2 ‘Advanced’ Settings
Display and configures the advanced settings.
Item Description
Fragment
Threshold
Set the Fragment threshold of wireless radio.
Default value is 2346.
RTS Threshold Set the RTS threshold of wireless radio. Default value is 2347.
Beacon Interval Set the beacon interval of wireless radio. Default value is 100.
DTIM Period Set the DTIM period of wireless radio. Default value is 3.
Data Rate Change data transfer rate. Default value is ‘Auto’ and it’s
recommended to use default setting.
N Data Rate Same as above, but only for 802.11n clients.
Channel Width Set channel width of wireless radio. Default setting is ‘Auto 20/40
MHz’.
Preamble Type Set the type of preamble of wireless radio, Default setting is ‘Short
Preamble’.
Broadcast Device
Name (SSID)
Decide if the product will broadcast its own device name or not. You
can hide the device name of this product (set the option to ‘Disable’)
CTS Protect Enable to reduce the chance of radio signal collisions between
802.11b and 802.11g wireless access points. It’s recommended to