VIEWSONIC WPG-360 - Manual (Page 14)

ViewSonic WPG-360 7
Connect the IR receiver extending cable to ‘IR
IN’ port located at the back of WPG, and place
the IR receiver at a place where you can point
the remote controller to it easily
Adjust the antennas so they are perpendicular
to the ground.
Connect the A/C power adapter to the
electrical outlet on the wall.
Connect A/C power adapter to the power jack
labeled as ‘12V’ at the back of WPG.
To fix the product placement, please use two
wall mount holes located at the back of the
product.