Vivitar vivtarr i7 - Manual (Page 64)

64
Date/Time Menu
When you capture an image with your camera, the image will include a time stamp
with the date and time that the image was taken.
The Date/Time menu allows you to set your camera’s date and time as desired. You
can also disable the timestamp for future images that will be taken with your camera.
On – The timestamp will appear on photos taken
Off – The date stamp will not appear on photos taken
To Enable/Disable the Timestamp:
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT
or RIGHT direction control button to scroll and select the
Date/Time menu.
3) Press the UP or DOWN direction control button to scroll through the menu
options.
4) Press the SET button to select and save the desired option.
5) A selected option icon will appear on the selected item.
6) Press the LEFT
or RIGHT button to select the next menu item.
7) Press the MODE button to exit the menu and return to your previous mode.
8) Remember that this setting will be saved by your camera until you manually
change the setting or restore the camera’s default factory settings.
To Set the Date and Time:
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT
or RIGHT direction control button to scroll and select the
Date/Time menu.
3) Press the UP or DOWN direction control button to highlight the “Date Setup”
menu option then press the SET button to select the option.
4) The “Date Setup” submenu will open.
5) Scroll through the window with the RIGHT
and LEFT navigation buttons.
6) For each field in the menu, use the UP and DOWN navigation buttons to set the
date and time.
7) When you have finished setting the date and time, press the SET button to save
your settings and return to the previous mode.