Vivitar vivtarr i7 - Manual (Page 33)

33
FLASH OPTIONS
There are several Flash options available on your camera. The options appear on the
Photo Capture Mode LCD screen in sequence.
To change the Flash mode, press the UP Quick Function button until you arrive at
your desired settings.
Important: When using Flash, stand between 8 to 10 feet away from the scene you
would like to capture.
Flash Type Description
Forced Off
(Default)

No flash will appear.

Use this when you do not want to activate Flash.

NOTE: A ‘Turn On Flash’ message appears when the
camera detects a need for flash. When this message
appears, it is recommended to press the Flash/Up
button and select one of the flash options: Auto Flash,
Forced On or Red-Eye Reduction.
A
Auto Flash

When you want the camera to determine if Flash is
needed, select Auto Flash.

The flash will automatically turn on according to the
lighting conditions.

When the LED light stops blinking, the Flash is ready for
use.

NOTE: In some cameras, an initial flash appears to test
your lighting conditions. If flash is needed, a second flash
will appear upon taking the photo.
Forced On

The flash is enabled for each photo.

NOTE: If you use this option in a well lit environment,
your photo may be appear too bright/light
(overexposed).
Red Eye Reduction

Eliminates the red-eye effect in a photo caused by flash.