Vivitar vivtarr i7 - Manual (Page 47)

47
Firmware (Factory Default Settings) Menu
Use this menu to view the Firmware version on your camera or to reset your camera
settings to the Factory Default Settings.
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT
or RIGHT direction control button to scroll and select the
Firmware menu.
3) The “Default Setting” is selected.
4) Press the SET button to reset the camera to the factory default settings.
5) You will be asked to confirm the resetting to the factory default settings.
6) Select “No” to exit the menu and return to the previous mode without resetting
to the default settings.
7) Select “Yes” and press the SET button to proceed with the reset.
You will then automatically exit the menu and return to the previous mode with
the digital camera settings set to the Factory Default Settings.
NOTE: After RESETTING to the default settings, it is recommended to select your
system Language, Date/Time and ViviLink for Photos and Videos. If you do not,
the next time your camera is powered on, you will be prompted to define those
settings.