Universal Remote Control (URS) URC-SR3 - Manual (Page 7)

Page 7
Programming URC-SR3 using
Pre-Programmed Codes
There are three different ways you can program
your URC-SR3 using the component brand codes
that are pre-programmed into the remote. One of
these will work for you!
• Quick Set-Up Method
• Three-Digit Code Entry Method
• Auto-Search Method
* * *
TRY THIS FIRST!
Quick Set-Up Method
STEP 1: Manually or using your old remote, turn
on the component you want to program—for
example, to program your TV, turn on your TV set.
STEP 2: Point the URC-SR3 toward the component
that you want to program (in this case the TV set)
and press and hold the component button (in this
case the TV button). While holding down the
component button, begin to press numeric
keys, one number at a time, starting from 1,
continuing to 2, 3 ... 0 until component (in this case
the TV) turns off.
STEP 3: Release the component button to save the
code. The component LED light will blink two times
to confirm that the code has been stored.
Repeat the above three steps for other components.
COMPONENT
BUTTONS
NUMBER
PAD