Universal Remote Control (URS) URC-SR3 - Manual (Page 19)

Page 19
SimpleSound™ Total System Volume
Control
SimpleSound is one of the most exciting features of
the URC-SR3. It gives you total volume control over
ALL the components in your system, even those that
do not have built--in volume control, such as TIVO,
DVD and DVR. SimpleSound saves you the hassle
and inconvenience of constantly switching between
component modes just to control volume.
First you should identify which device in your
system will be used to deliver sound. In a basic
system, the sound may come from your TV speaker.
In a more advanced system, the sound may come
from your audio components (such as a Surround
Sound Receiver or Home Theatre system).
Now, let’s set--up SimpleSound. Here’s how:
STEP 1: Press and hold the button that corresponds
to the Component you want to add volume control
to (DVD) and the SELECT (SEL) button at the same
time for about three seconds until the component
LED light turns on.
IMPORTANT: You have 30 seconds to perform
the next step while you are in programming mode.
If you do not press a button within 30 seconds, the
component LED light will turn off. The remote will
exit the programming mode and you will have to
start over.
SELECT
BUTTON
COMPONENT
BUTTONS