Setting the day & time (for base), Setting the record time (or announce only) – Uniden DECT2085 User Manual
Page 48
47
47
Setting Up the
Answering System
48
48
Setting the Day & Time (for Base)
If.you.do.not.set.the.clock.on.your.answering.system,.your.messages.may.not.have.the.correct.time.and.day.stamp..
Press.[Menu/Select].
Move.the.cursor.to.DAY.&.TIME.and.press.[Menu/Select].
Use.[
] and.[
].to.select.the.day.of.the.week,.and.press.[Menu/Select].
Use.the.number.keypad.([0].through.[9]).to.enter.the.hour.and.minutes.
Use.[
] and.[
].to.select.AM.or.PM,.and.press.[Menu/Select]
. You hear a confirmation tone.
Notes:.•.The.handset.does.not.display.the.day.and.time,.although.you.can.set.up.the.day.and.time.from.the.handset.
.
•.When.the.power.of.the.base.is.off,.the.day.and.time.setting.will.be.erased;.you.need.to.set.up.again.
Setting the Record Time (or Announce only)
You.can.choose.how.long.callers.have.to.record.a.message..Set.the.record.time.to..MINUTE.or.4.MINUTES.to.limit.
the.time.for.incoming.messages..If.you.set.the.record.time.to.ANNOUNCE.ONLY,.the.answering.system.answers.the.
call.but.prevents.callers.from.leaving.a.message.
Press.[Menu/Select]...Select.the.ANSW..SETUP.menu,.and.then.the.RECORD.TIME.submenu.
Move.the.cursor.to.select.a.record.time.(.MINUTE,.4.MINUTES,.or.ANNOUNCE.ONLY).
Press.[Menu/Select]
. You will hear a confirmation tone.
While.your.answering.system.is.set.to.ANNOUNCE.ONLY,.the.message counter.on.the.base.LCD.displays.“A.”.If.
you.are.using.the.prerecorded.greeting,.the.system.automatically.switches.to.the.following.message:.“Hello,.no.one.
is.available.to.take.your.call..Please.call.again.”.If.you.are.using.a.personal.greeting,.the.system.continues.to.use.
that.greeting.
)
2)
3)
4)
5)
)
2)
3)