Uniden DECT2085 - Manual (Page 13)

2
Installing the Phone
Place the
mounting slots
over the pins on
the wall plate.
Slide the base down
to lock it into place.
Wall plate
(To AC outlet)
Notes:
DO.NOT.use.an.AC.outlet.controlled.by.a.wall.switch.
To.mount.the.phone.directly.on.the.wall,.insert.two.#0.screws.(minimum.length.of..
3 /
8
.inches,.not.supplied).into.
the.wall,.3. 5 /
6
.inches.apart;.leave.the.screw.heads. /
8
.inch.away.from.the.wall.to.allow.room.for.mounting.the.
phone..Be.sure.the.wall.is.capable.of.supporting.the.weight.of.the.phone,.and.use.the.proper.type.of.anchoring.
device.for.the.wall.material..No.need.to.route.the.telephone.cord.through.the.hole.of.the.wall.mount.adapter.when.
mounting.directly.on.the.wall.
•
•