Using multiple bases, Using.multiple.bases – Uniden DECT2085 User Manual

Page 25

Expanding

our Phone

Using Multiple Bases

The.handsets.supplied.with.your.phone.(or.any.DCX200.accessory.handsets).can.be.registered.to.a.total.of.four.
different.bases..Compatible.bases.include.the.DECT2060,.DECT2080,.DECT2085,.and.DECT2088.models..Once.
your.handset.is.registered.to.more.than.one.base,.you.can.set.the.handset.to.search.automatically.the.available.
base,.or.you.can.select.manually.which.base.the.handset.should.connect.to.(for.example,.if.you.have.one.base.with.
an.answering.machine,.you.can.tell.the.handset.to.connect.that.base.to.check.messages)..

Registering the Handset to Another Base

Make.sure.the.handset.battery.is.fully.charged.

To.register.a.handset.to.DECT2060.or.DECT2080.base:

Disconnect.the.base.AC.adapter..Then.press.and.hold.

[find hs].while.you.reconnect.the.adapter..

Keep.pressing.

[find hs].until.the.charge.LED.starts.to.blink.

To.register.a.handset.to.DECT2085.or.DECT2088.base:

With.the.phone.in.standby,.press.[Menu/Select].on.the.base..Move.the.cursor.to.select.the.REGISTER.
HANDSET.menu,.and.then.press.[Menu/Select]..HANDSET.REGISTERING.will.appear.

On.the.handset,.Press.[Menu/Select]..Select.the.REGISTER.BASE.menu..HANDSET.REGISTERING.will.
appear.in.the.display.

Wait.approximately.thirty.seconds..“REGISTRATION.COMPLETE”.will.be.displayed.to.indicate.the.handset.has.
been.registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned.

If.REGISTRATION.FAILED.appears.in.the.LCD,.please.try.these.steps.again.

)

•