Uniden DECT2085 - Manual (Page 11)

9 0
Installing the Phone
DSL Filter
Do.you.have.DSL.or.any.high-speed.Internet.service.delivered.through.
your.phone.line?
Try putting a DSL filter between the base and the wall jack. Without a filter, .
telephone-line-based.Internet.services.can.interfere.with.standard.phones.
Testing the Connection
Try.making.a.call..If.your.call.does.not.connect.or.you.cannot.get.a.dial.tone,.try.the.following.steps:
Make.sure.the.AC.adapter.cord.is.securely.connected.to.the.DC IN 9V.jack.and.a.standard.power.outlet.
Check.to.make.sure.the.battery.is.fully.charged..(If.you.don’t.see.the.“battery.full”.icon,.check.to.make.sure.
the.battery.is.properly.connected.and.charge.again.)
Change.the.dial.mode.
Changing the Dial Mode
Your.phone.can.communicate.with.the.telephone.network.in.two.different.ways:.tone.dialing.or.pulse.dialing..These.
days,.most.base.networks.use.a.method.called.tone.dialing,.so.your.phone.comes.programmed.for.tone.dialing..If.
your.phone.company.uses.pulse.dialing,.you.will.need.to.change.your.phone’s.dial.mode..If.you.don’t.get.a.dial.tone.
or.can’t.connect.to.the.telephone.network,.please.follow.the.steps.below.to.modify.your.phone’s.settings:
Press.[Menu/Select]..Select.the.GLOBAL.SETUP.menu,.and.then.the.
DIAL.MODE.submenu.
Scroll.[ ].to.highlight.PULSE.
Press.[Menu/Select]
. You will hear a confirmation tone.
If.you.ever.need.to.change.the.dial.mode.back.to.tone.dialing,.follow.the.same.procedure,.but.select.TONE.in.step.2.
Note:. If.you.have.multiple.bases,.select.the.base.before.changing.the.dial.mode.(see.Selecting.the.Base.on..
page.25).
NOW YOU ARE READY TO USE YOUR PHONE!
.
2.
3.
.
2.
3.
Telephone cord
Telephone
wall jack
DSL filter