Uniden POLARIS - Manual (Page 9)

6
1. TX (Transmit) - Indicates transmitting.
TRI (Triple Watch) - Indicates Triple Watch Mode is in effect.
2. HI (High) - Indicates transmit output is 25 Watts.
LO (Low) - Indicates transmit output is 1 Watt.
3. USA - Indicates US Channel Mode.
CAN - Indicates Canada Channel Mode.
INT - Indicates International Channel Mode.
4. ALT - Indicates Weather Alert Mode has been activated.
5. MEM (Memory) - Indicates Memory Scan Mode status for each
channel selected.
6. WX - Indicate Weather Channel Mode has been activated.
7. CH TAG
8. Channel Display - Indicates Channel Number in use.
9. (Alarm mark) - It appears when the alarm is set.
10. (Exclamation mark) - It appears when it receives WX Alert.
11. (GPS mark) - It appears while GPS module is receiving the
data.
12. (WHAM mark) - It appears when it is connected to the
control unit of WHAM.
Note: This icon appears while the POLARIS is in the
“data cleaning” mode.
POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 6