Uniden POLARIS - Manual (Page 30)

27
3. Rotate the PUSH – SELECT knob to
select
POS.SEND .
4. Press the PUSH – SELECT knob,
and the individual directory appears.
5. Rotate the PUSH – SELECT knob to
select the name to send your position
information.
KENT NEWMAN
PAUL HUBER
JUNE BRAWLEY
EXIT
1-E. POSITION SEND
This radio has the ability to send the position of your vessel to another
vessel using a VHF marine radio equipped with DSC.
Note: Position send is only available when it is connected to the
GPS.
1. Press and hold H/L/MENU for
2 seconds.
2. Press the PUSH – SELECT knob at
DSC CALL , the DSC CALL menu
appears.
HI CAN
SHIP-SHIP
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
INDIVIDUAL
GROUP
ALL SHIPS
POS.REQUEST
POS.SEND
STANDBY
6. Press the PUSH – SELECT knob,
the following screen appears.
Confirm if the name and address is
correct. Press the PUSH – SELECT
knob to select
SEND .
POS.SEND
KENT NEWMAN
654321000
SEND
CANCEL
7. When the calling radio receives an
acknowledgment, the following
screen appears. POS.REPLY
06/15 03:00P
KENT NEWMAN
70.00.000 N
110.00.000 E
POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 27