Uniden POLARIS - Manual (Page 43)

40
To set USER MMSI code
1. Press and hold H/L/MENU for
2 seconds.
2. Press the PUSH – SELECT knob at
SETUP , the SETUP menu appears.
3. Rotate the PUSH – SELECT knob to
select
USER MMSI .
4. Press the PUSH – SELECT knob,
the following screen appears.
5. You can now enter the USER MMSI
code. Rotate the PUSH – SELECT
knob clockwise to increase the
number, counterclockwise to
decrease. The number will be
entered when the PUSH – SELECT
knob is pressed, and the blinking
digit moves to the right.
6. After the final digit is entered, the
confirmation screen appears.
Press the PUSH – SELECT knob.
Note: You can only program your
POLARIS twice with an MMSI
number. After that, send your
POLARIS to Uniden for factory
service.
USER MMSI
000000000
FIPS
USER MMSI
GROUP MMSI
U.I.C.
DIRECTORY
AUTO.CH.SW
HI CAN
MEM
TELEPHONE
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
USER MMSI
685749638
YES
NO
USER MMSI
685749638
ERROR TOO
MANY ENTRIES
PRESS
MENU KEY
POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 40