Uniden POLARIS User Manual
Page 64
61
3-K-1. STANDARD
This feature allows you to set up the time difference manually.
1.
Press and hold H/L/MENU for
2 seconds.
2.
Press the PUSH – SELECT knob at
SETUP
, the SETUP menu appears.
3.
Rotate the PUSH – SELECT knob to
select
TIME OFFSET
.
4.
Press the PUSH – SELECT knob at
STANDARD
, the following screen
appears.
5.
Rotate the PUSH – SELECT knob to
select the appropriate time offset
from GMT (UTC).
6.
Press the PUSH – SELECT knob
and the POLARIS returns to the
channel display screen.
Note:
The time offset table is pre-
programmed to include the
standard North American time
zones. (EST, CST, MST, and PST.)
06/15 11:00P
054
≥
30.0KT
70.00.000 N
100.00.000 W
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
AUTO.CH.SW
POS.REPLY
CH TAG
WHAM
ALARM CLOCK
TIME OFFSET
STANDARD
DAYLITE SAV
EXIT
-2
-1
0 GMT
+1
+2
+3
06/15 11:00P
054
≥
30.0KT
70.00.000 N
100.00.000 W
3-K. TIME OFFSET
This feature allows you to set the time difference between local time and
UTC (GMT) Time. This feature is only available when the GPS is
connected to the NMEA0183 jack.
POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:19 PM Page 61