Uniden POLARIS - Manual (Page 17)

14
WEATHER CHANNELS
To select Weather Channels 0-9, press
WX/ALERT. The radio will go to the last
selected Weather Channel. Press
▲ or ▼
on the microphone to select a different
Weather Channel. It also can be changed
by the PUSH – SELECT knob on the base.
To exit from Weather Channel:
● Press WX/ALERT. The radio returns
to the previous Marine channel.
MEM (Entering channel numbers into Memory Scan)
You can enter channels into Memory Scan for instant scanning at any
time. When a channel is selected for Memory Scan,
MEM appears on the
LCD display.
To enter a channel into Memory Scan,
select the channel you want to store by
rotating the PUSH – SELECT knob, and
then press and hold SCAN/MEM for
2 seconds. The channel is stored in
Memory Scan and
MEM appears on the
LCD display.
WX
HI CAN
MEM
TELEPHONE
MANUAL TUNING
To manually select a channel, rotate the PUSH – SELECT knob
clockwise to increase the number or counterclockwise to decrease the
number. It also can be changed by
▲ or ▼ on the microphone.
Communication channels are located on channel 01-28 and 60-88.
Weather channels are located on channels 0-9.
POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 14