Uniden POLARIS - Manual (Page 60)

57
4. Press the PUSH – SELECT knob at
LINK CH, the following screen
appears.
5. Rotate the PUSH – SELECT knob
clockwise to increase the number,
counterclockwise to decrease.
The number will be entered when the
PUSH – SELECT knob is pressed.
6. After the LINK CH is entered, a
confirmation screen appears.
Rotate the PUSH – SELECT knob,
and then press PUSH – SELECT.
Note: You can select the channel 01-20.
LINK CH
05
LINK CH
05
YES
NO
3-I-2. LINK CH
This feature allows you to change the channel between the POLARIS
and the WHAM if you encounter interference.
1. Press and hold H/L/MENU for
2 seconds.
2. Press the PUSH – SELECT knob at
SETUP , the SETUP menu appears.
3. Press the PUSH – SELECT knob at
WHAM , the WHAM menu appears.
U.I.C.
DIRECTORY
AUTO.CH.SW
POS.REPLY
CH TAG
WHAM
DSC CALL
SYSTEM
SETUP
REV.CH.MEM
EXIT
BASE ID
LINK CH
EXIT
HI CAN
MEM
TELEPHONE
POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 57