Common message elements, Message values, Nmea messages – Trimble Outdoors SPSX51 User Manual
Page 121

SPSx51 Modular GPS Receivers User Guide
119
NMEA-0183 Output
A
Common message elements
Each message contains:
•
a message ID consisting of $GP followed by the message type. For example, the
message ID of the GGA message is $GPGGA.
•
a comma
•
a number of fields, depending on the message type, separated by commas
•
an asterisk
•
a checksum value
Below is an example of a simple message with a message ID ($GPGGA), followed by 13
fields and a checksum value:
$GPGGA,172814.0,3723.46587704,N,12202.26957864,W,2,6,1.2,18.893,M,-
25.669,M,2.0,0031*4F
Message values
NMEA messages that the receiver generates contains the following values.
Latitude and longitude
Latitude is represented as ddmm.mmmm and longitude is represented as
dddmm.mmmm, where:
•
dd or ddd is degrees
•
mm.mmmm is minutes and decimal fractions of minutes
Direction
Direction (north, south, east, or west) is represented by a single character: N, S, E, or W.
Time
Time values are presented in Universal Time Coordinated (UTC) and are represented
as hhmmss.cc, where:
•
hh is hours, from 00 through 23
•
mm is minutes
•
ss is seconds
•
cc is hundredths of seconds
NMEA messages
When NMEA-0183 output is enabled, the following messages can be generated.