Toshiba 705T - Manual (Page 240)

Settings 240
PIN Codes
Set the various PIN code (page 40) settings used for USIM card security.
Setting PIN1 Code Request
Set whether to request the entering of your PIN1 code to perform verifi cation each time
a USIM card is inserted into the handset and the power is turned on.
1. In standby mode, press @, select Settings and press J (Select).
2. Select Security Settings and press J (Select).
3. Select PIN1 Code Request and press J (Select).
4. Select On and press J (Select).
5. Enter your PIN1 code and press J (OK).
Changing PIN Codes
Change the PIN1 code and PIN2 code (page 40).
1. In standby mode, press @, select Settings and press J (Select).
2. Select Security Settings and press J (Select).
3. Select Change PIN1 or Change PIN2 and press J (Select).
4. Enter your current PIN1 code or PIN2 code and press J (OK).
5. Enter your new PIN1 code or PIN2 code and press J (OK).
6. Re-enter your new PIN1 code or PIN2 code for confi rmation and press J (OK).
Note
Set PIN1 Code Request to On
before you change a PIN1 code.
Security Settings