Tripp Lite Alternative Power Sources - Manual (Page 14)

14
Specifications
(Corded Models)
CORDED MODELS: APSINT1012 APSINT1024
Weight: 11.9 Kg 11.9 Kg
INVERTER
Continuous power (@ 20° C):
1000 W 1000 W
Surge power (5 seconds): 2000 W 2000 W
Efficiency (Full Load): 89% 89%
Minimum DC Fuse Rating: 170A 90A
DC Input Current @ Nominal V DC
Full Load 95A 47A
No Load 2.6A* 1.5A*
Nominal Input Volts: 12 VDC 24 VDC
DC Input Voltage Range: 10-15 VDC 20-30 VDC
Nominal Output Volts: 230 VAC ±5% 230 VAC ±5%
Nominal Output Frequency: 50 † Hz ±.3% 50 † Hz ±.3%
BATTERY CHARGER
Charging Capacity DC:
30 A 15 A
Maximum Cable Length 2 ft. 7 ft.
Acceptance Volts VDC: Selectable Selectable
14.4 V**/14.2 V Wet**/Gel 28.8 V**/28.4 V Wet**/Gel
Float Volts VDC (w/gel): 13.3 V (13.6 V) 26.6 V (27.2 V)
Input Voltage AC: 230 V 230 V
Input Current AC: 4.3 A 8.3A
LINE VAC OPERATION
Minimum Input AC Volts:
Selectable 144**,163, 182 or 201VAC Selectable 144**, 163, 182 or 201 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum):
Selectable 259** or 264 VAC Selectable 259* *or 264 VAC
Maximum Input Current
(Continuous, Charger at Maximum):
8.3A 8.8A
Input Frequency: 50 Hz ±10% 50 Hz ±10%
Maximum Output AC (Continuous): 4.3 A 4.3 A
Automatic Transfer Time: 4-6 ms 4-6 ms
*Load sense can reduce this to 1/30 of the listed current. **Factory default setting.
† A technician may be able to convert your UPS to receive 60 Hz ±10%power. Consult Tripp Lite for details.