Display 1, Fl dimmer (default: auto), Display device status (default: on) – Toshiba RD-XV47KE User Manual
Page 99: Background colour (default: on), Screen saver (default: on)
99
EN
In
troducti
on
Connecti
o
ns
Bas
ic Setup
P
layback
Ed
iti
n
g
V
CR Fu
ncti
on
s
O
th
ers
Fu
nc
ti
on
Set
u
p
Recordi
n
g
Display
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select “Display” using
[Cursor
U
/
D
], then press [ENTER].
3
Select a desired item using
[Cursor
U
/
D
], then press [ENTER].
4
Refer to 1. to 4. on this page and set
the selected item.
5
When you finish with the setting,
press [SETUP] to exit.
1. FL Dimmer (Default: Auto)
Set the front panel display brightness.
You can choose one from “Auto,” “Bright” and “Dark”.
If “Auto” is selected, the display gets dark when the
power is off.
(Follow steps 1 to 2 above.)
Select “FL Dimmer” using
[Cursor
U
/
D
], then press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor
U
/
D
], then press [ENTER].
The selected setting will be checked and
activated.
2. Display Device Status (Default: On)
Set the operating display.
(Follow steps 1 to 2 on the left.)
Select “Display Device Status” using
[Cursor
U
/
D
], then press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor
U
/
D
], then press [ENTER].
The selected setting will be checked and
activated.
On: Shows the operating display.
Off: Does not show the operating display.
3. Background Colour (Default: On)
Set the background colour.
When there is no signal for the picture signal input,
the screen changes to blue background.
(Follow steps 1 to 2 on the left.)
Select “Background Colour” using
[Cursor
U
/
D
], then press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor
U
/
D
], then press [ENTER].
The selected setting will be checked and
activated.
4. Screen Saver (Default: On)
You can set to “On” to activate the Screen Saver after
15 minutes of no activity.
(Follow steps 1 to 2 on the left.)
Select “Screen Saver” using
[Cursor
U
/
D
], then press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor
U
/
D
], then press [ENTER].
The selected setting will be checked and
activated.
Setup Menu
01/01/07(Mon)
19:34
Editing
Editing
Disc Management
Disc Management
Dubbing
Dubbing
Timer Programme
Timer Programme
Title List
Title List
Initial Setting
Initial Setting
Digital Audio Setting
Digital Audio Setting
Playback
Playback
Recording
Recording
Display
01/01/07(Mon)
19:34
Display
Display Device Status
Background Colour
Screen Saver
FL Dimmer
Bright
Dark
Auto
On
Off
On
Off
On
Off
E3B90ED_EN.book Page 99 Friday, February 23, 2007 12:38 PM