TANDBERG 1000 MXP - Manual (Page 97)

General Use
89
3.13.1.7 Warnings
If any warnings registered by the system it will be displayed in the Warnings menu. Open a
warning in the list to get more information about the warning.
The following warnings are displayed if detected by the system:
ISDN BRI warnings

ISDN is enabled on BRI line x, but the line is not connected. Please check your network
connection or disable the line. (101)

There is something wrong with ISDN BRI line x. Please check your network connection.
(102)
IP network quality warnings

The system is experiencing packet loss in the IP network. This may affect the quality of
the call.

The system is experiencing high jitter in the IP network. This may affect the quality of the
call.

The system is dropping IP packets due to latency in the network. This may affect the
quality of the call.
ISDN PRI warnings

ISDN PRI is configured for this system, but the line is not connected. Please check your
network connection or disable the network. (131)

There is something wrong with the ISDN PRI line (Blue alarm). Please check your
network connection. (132)

There is something wrong with the ISDN PRI line (Yellow alarm). Please check your
network connection. (133)

There is something wrong with the ISDN PRI line (D-Channel not active). Please check
your network connection. (134)
External Network warnings

External Network is configured for this system, but the line is not connected. Please
check your network connection or disable the network. (161)
Leased E1/T1 warnings

Leased E1/T1 is configured for this system, but the line is not connected. Please check
your network connection or disable the network. (191)

There is something wrong with the Leased E1/T1 line (Blue alarm). Please check your
network connection. (192)