Appendix 7, Web interface – TANDBERG 1000 MXP User Manual

Page 212

Text mode
Original mode

D1372202_T1000_MXP_User_Manual

204

Appendix 7

Web Interface

It is possible to access and maintain the system remotely via a local area network (LAN) using a
standard Web-browser. Connect your system to a LAN with a Network cable.

How to configure your system for web interface:

1. Open Administrator Settings and choose Network\

LAN Settings

2. Specify IP-assignment DHCP or Static. If DHCP is selected, no other settings are

needed. If Static is selected, IP-address, IP-subnet mask and Gateway must be
specified.

3. Start your Web-browser. In the address field type the IP-address of the system. Enter the

password and the Web-page of the system will be shown. The default password is
TANDBERG.

4. Restart the system. Choose Restart from the Control Panel.

Example:

IP-assignment: Static
IP-address: 196.9.200.129
IP-subnet mask: 255.255.255.0
Gateway: 196.9.200.21