TANDBERG 1000 MXP - Manual (Page 25)

General Use
17
1. Mic Off turns your microphone on and
off, see Mic off .
2. Arrow keys are used for navigation in
the menu and for moving the camera*
when the menu is hidden, see
Navigation .
3. Volume + and
–
adjusts the Codec
volume only and not the monitor's
volume, see
Volume + and - .
4. The Layout key toggles between full
screen and different display layouts, see
Layout .
5. Cancel takes you back one step in the
menu system. Use Cancel to delete
characters in an input field, see
Navigation .
6. Press the Call key to place a call, see
Make a Call .
7. Camera presets define specific camera
positions. Move the camera to the
desired position and press and hold a
number key for 1 second to save the
current camera position to that number
key. To activate a preset whilst in a call,
simply press and release that number
key, see Camera Presets.
8. Snapshot takes a snapshot of your video
only while you are in a call, see Take
New Snapshot .
9. The Presentation key switches to a
predefined presentation source. If the
Presentation key is held down for 1
second then the Presentation video
sources menu will appear, see
Presentation Key .
10. Press OK/Menu to show the menu and
to select menu items, see Navigation .
11. Use Zoom + and
–
to zoom the camera
in and out.*
12. Selfview displays your outgoing video.
Press Selfview again to turn selfview off,
see
Selfview .
13. Use the Phone Book to store and recall
video contacts for easy placement of
calls, see
Phone Book .
14. Use the red End Call key to end the
current call. Pressing this key when not
in a call will place the system in Standby
mode, see
End Call and Standby .
15. Number/Letter keys function in the same
manner as with a mobile or cellular
phone, see
Number and Letter keys .
16. Press Touch tones when you are in a