Toshiba TEC H-9100N - Manual (Page 55)

10. PROGRAMMING PROCEDURES
10.21 FREE FORMAT SETTING
10-33
NOTES:
1. The following print items cannot be magnified.
LOGO (1)
Safe handling precautions
LOGO (2)
Barcode
LOGO for Frequent Shopper
Nutrition
FSP block
Ingredient
2. Base label format
According to Initial set #10-1, the base label format having the same width is selected. Therefore
it is imposible to select format having a width of 57 mm when the width of 80 mm is selected in the
initial set, and vice versa.
3. Data range
The valid range of each data is follows.
Free Format No.: 1 to 3 for 57-mm and 80-mm wide labels.
The free format No. corresponds with label format #41 to 43 and #91 to 93 for Batch print.
Programmed free format data remains even though the label width is changed by the initial set.
This means that the H-9100N has up to 6 formats.
Base label format No.:
57-mm wide: #10, 11, 13, 15, 16, 21, 23, 25, 26, 31, 33, 35, 36, 44
80-mm wide: #10, 11, 23, 44, 45, 46, 47
Label length (mm): 57-mm wide: 30 to 195
80-mm wide: 30 to 135
Label width (mm): 57 or 80 according to Initial set No. 10-1
Barcode height (mm): 0 to 30
X point (dot): 57-mm wide: 0 to 447
80-mm wide: 0 to 631
Y point (dot): 57-mm wide: 0 to 1560
80-mm wide: 0 to 1080
No. of ingredient lines: 0 to 38
No. of Ing. characters per line: 32 to 54 (default: 54)