Toshiba TEC H-9100N - Manual (Page 42)

10. PROGRAMMING PROCEDURES
10.12 DATE/TIME SETTING
10-20
NOTES:
1. The error mode can be released by pressing the
key, and you can operate again
through the above steps.
2. Use the metal cassette tape which is commercially available and has a capacity of 45 or 60
minutes recording.
3. For operations of the CMT loader, refer to the instruction manual provided with the CMT
loader.
10.12 DATE/TIME SETTING
Menu Page: 2
Item No.:
1
Date, time, machine number, and store code are set with this procedure.
10.13 CMT/PL-3
Menu Page: 2
Item No.:
2
CMT Operations
The H-9100N is designed to interface with a Cassette Magnetic Tape loader. This loader allows the
transfer of the entire PLU file, ingredient file and other data from the H-9100N to tapes. This can be
accomplished in number of operation steps.
In turn, information from the tape can also be transferred to another H-9100N scale.
1
PROG.
ESC.
Page 2
Main
Set the date.
(Month, Day, Year)
Set the machine No.
(max. 6 dig.)
ENTER ENTER
ENTER ENTER
Set the time.
(Hour, Minute)
Set the store No.
(max. 5 dig.)
NOTES:
1. Express the time in a 24-hour military format.
2. The H-9100N will check details of date (time) input, and any wrong date (time) will result in an error
mode. Then the correct date (time) should be re-entered and press the key.
3. Even when initial Setting# 8-4, 8-5 or 8-6 is set to the Julian Date side, the way to enter the date
in the date setting operation is the same as in the ordinary case.
4. The date display method can be changed by the initial setting.
CLEAR
2 PROG.
ESC.
Page 2
Main
Set the transmission items.
(Refer to table 4) ENTER
CLEAR
k
Page 2
k
Page 2
NEXT
PLU
or