TRENDnet TVP-224HR - Manual (Page 123)

TVP-224HR User’s Guide
123
Remote Destinations
Each remote TVP-224HR to be reached must be assigned a unique destination ID.
Obtain the IP addresses of the TVP-224HR at remote sites and fill out the
worksheet for remote destinations by designating each
remote TVP-224HR a unique destination ID, then use the CLI command atpm
dadd dest_id h323 ip_addr [ip_port] for each entry in the worksheet
to add it to the destination table. The dest_id in the command corresponds to the
Destination ID in the worksheet, the ip_addr corresponds to the Port#, the
optional ip_port corresponds to the IP port. You may alternatively use the web
browser to add remote destinations to the destination table.
IP address IP port
(optional)
Mode Destination ID
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323
. . . H323