TRENDnet TVP-224HR - Manual (Page 113)

TVP-224HR User’s Guide
Console Port
The console port uses a DB-9 RS-232 connector. The supplied straight through
RS-232 cable connects the console port of the TVP-224HR to a console PC or
terminal. Pin assignment for the port is described in the following table.
DB-9 pin Signal
1 Not connected
2 TxD
3 RxD
4 Not
connected
5 Ground
6 Not
connected
7 Not connected
8 Not connected
9 Not connected
LAN Port
The 10/100 LAN port use standard RJ-45 connector and Ethernet pin assignment.
The following diagram and table show the pin assignment on the port connector.
When connecting the LAN port to switches or repeaters, you must use a straight-
through cable.
RJ45 pin Signal
1 RxD+
1 2 3 4 5 6 7 8
2 RxD-
3 TxD+
4 Not
connected
5 Not connected
6 TxD-
7 Not
connected
8 Not connected
113