TOA Electronics SCP-2700 - Manual (Page 48)

36 2B. Settings
Adjusting Volume Settings
Adjust your phone’s volume settings to suit your needs
and your environment.
1. Press > Settings > Sounds > Volume .
2. Select Ringer , Earpiece , Headset , Speakerphone ,
Applications , or Start Up/Power Off .
3. Press the navigation key left or right to choose a
volume level and press
DONE (left softkey).
You can set the alert volume separately from the ringer
volume setting.
1. Press > Settings > Sounds > Volume > Advanced...
2. Select Alarms , Text Message , Picture Mail , Voicemail ,
Voice SMS , or Email .
3. Select Separate Volume .
4. Select a volume level, and press DONE (left softkey).
Alert Notification
Set your phone to alert you with an audible tone when
you change service areas, once a minute during a voice
call, or when a call has been connected.
1. Press > Settings > Sounds > Alerts .
2. Select Beep Each Minute , Out of Service , Connect , or
Signal Fade/Call Drop .
3. Select On or Off .
Tip You can make the alert vibrate at any volume level
by checking Always Vibrate.
Tip You can adjust the ringer volume in standby mode
(or the earpiece volume during a call) by using the
volume button on the left side of your phone.
You can make your phone vibrate at any volume
level by checking Always Vibrate.