TOA Electronics SCP-2700 - Manual (Page 38)

26 2A. Phone Basics
Speed Dialing
You can store up to 98 numbers in your phone’s speed
dial memory to make contacting friends and family
easier.
You must assign a speed dial number to the existing
phone number beforehand. See “Assigning Speed Dial
Numbers” on page 61.
To use speed dial for locations 2-9:
ᮣ From standby mode, press and hold the
appropriate key for approximately two seconds.
To use speed dial for locations 10-99:
ᮣ From standby mode, press appropriate keys, and
then press
.
The display confirms that the number has been dialed
when it shows “Connecting...”
Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. You can
use either of the following abbreviated dialing features.
ⅷ Contacts Match – Retrieve any number saved in your
Contacts by entering only the last three to six digits of
the number.
ⅷ Prepend – Prepend the first five or six digits (for
example, the area code and prefix) to any four or five
digits you enter.
To activate the Contacts Match feature:
1. Press > Settings > More... > Call Setup .
2. Select Contacts Match > On .
To activate the Prepend feature:
1. Press > Settings > More... > Call Setup >
Abbreviated Dialing .
2. Select Prepend > On .
3. Enter a five- or six-digit number and press .
Note Speed dialing may not be available when you are
roaming; when you are roaming off the Nationwide
Sprint Network, you must always dial using eleven
digits (1+ area code + number).