Tunturi T60F User Manual

Page 12

OWNER’S MANUAL

•

T60F

minute and turn the power switch on to reset the
treadmill. This should clear incidental errors and ready
the treadmill for normal operation again. If after you
have reset the treadmill by turning the power switch off
and on again, and the treadmill is still not operational,
contact your local Tunturi dealer for service.

If you require spare parts, always give the model, serial
number of your equipment and the spare part number
for the part you need. The spare part list is at the back
of this manual. Use only spare parts mentioned in the
spare part list.

ERROR CODES

The user interface will display information about
operational faults.

SYSTEM CHECK FAILED. Possible motor controller
fault. Turn the power switch off, wait 1 minute and
turn the power switch on again. If treadmill recovers
to normal operation, you may continue to use the
treadmill. Otherwise, call the dealer for service.

SPEED SENSOR ERROR. Call the dealer for service.

MOTOR SPEED ERROR. Ensure correct usage of
the treadmill. Do not push the belt with your feet.
Turn the power switch off, wait 1 minute and turn the
power switch on again. If treadmill recovers to normal
operation, you may continue to use the treadmill.
Otherwise, call the dealer for service.

MOTOR OVERLOAD. Ensure correct usage of the
treadmill. Do not brake the belt. Turn the power switch
off, wait 1 minute and turn the power switch on again.
If treadmill recovers to normal operation, you may
continue to use the treadmill. Ensure the lubrication
is sufficient, re-lubricate the running deck if needed.
Otherwise, call the dealer for service.

LIFT MOTOR ERROR. Call the dealer for service.

LIFT MOTOR OVERLOAD. Ensure correct usage
of the treadmill. Do not overload the lift motor by
continuously changing the elevation. Turn the power
switch off, wait 1 minute and turn the power switch on
again. The lift motor will be automatically calibrated
when the power switch is turned on. If treadmill
recovers to normal operation, you may continue to use
the treadmill. Otherwise, call the dealer for service.

MAINTENANCE CODE

CHECK LUBRICATION. Ensure the lubrication is
sufficient, re-lubricate the running deck only if needed.
Remove the code by pressing the ENTER key twice.

MOVING AND STORAGE

The T60F can be folded up to space saving storage
position. Always let the treadmill come to a complete
stop before lifting the running deck into the storage
position. Turn off the power switch and unplug the
power cord from the wall and the treadmill. Take hold
of the rear end of the running base and lift up until the

running base is locked in place.

NOTE!

The gas spring is

designed to make lifting the running base easier. Always
remember to ensure that the running base is locked
in the storage position. When in storage position, the
treadmill will automatically rest on the transportation
wheels. Push the equipment on the transportation
wheels. To release the folding lock, press the left gas
spring lightly with your foot on the sticker indicating
the folding mechanism and pull the running base down.
Lower the treadmill carefully onto the floor.

NOTE!

Transport the treadmill with extreme caution

over uneven surfaces, for example over a step. The
treadmill should never be transported upstairs using
the wheels over the steps, instead it must be carried.
We recommend that you use a protective base when
transporting the equipment. The running belt needs to
be realigned and centered after moving.

To prevent malfunctioning of the treadmill, store it in a
dry place with as little temperature variation as possible,
protected against dust. Always unplug the treadmill
from the electrical outlet when not in use.

TECHNICAL DATA

Length .........................................202 cm / 79“
(storage position ..........................115 cm / 45”)
Height .........................................138 cm / 54”
(storage position ..........................175 cm / 69”)
Width .........................................94 cm / 37”
Weight ........................................105 kg / 231 lbs
Running surface ..........................54 x 138 cm
Speed ..........................................0,5-16,0 km/h /
Elevation range ............................0-10 %
Motor ..........................................2,0 HP (1,49 kW)

T60F treadmill meets the requirements of the EU’s
EMC Directives on electromagnetic compatibility (EN
61000-6-1, EN 61000-6-3, 61000-3-3. FCC: CFR 47
part 15, UL 1647, CAN/CSA-C22.2 No. 68-92) and
electrical equipment designed for use within certain
voltage limits (EN 60335-1). This product therefore
carries the CE label. T60F treadmill meets EN precision
and safety standards (Class HA, EN-957, parts 1 and 6).

Due to our continuous policy of product development,
Tunturi reserves the right to change specifications
without notice.

CAUTION!

The instructions must be followed carefully

in the assembly, use and maintenance of your
equipment. The warranty does not cover damage due to
negligence of the assembly, adjustment and maintenance
instructions described herein. Changes or modifications
not expressly approved by Tunturi Oy Ltd will void the
user’s authority to operate the equipment!

We wish you many enjoyable trainings with your

new Tunturi training partner!

T60F_manual_Tekstikorjaukset.indd 12

10.9.2004 08:54:32