Appendix, A-1 appendix appendix appendix appendix appendix, A.1 specifications – Teledyne 3160 User Manual
Page 59
A-1
Appendix
Appendix
Appendix
Appendix
Appendix
TELEDYNE ANALYTICAL INSTRUMENTS
Appendix
A.1
Specifications
(Subject to change without notice.)
Ranges:
(Six ranges with AutoRanging on all ranges)
1:
0–1 part per million (ppm) O
2
2:
0–10 ppm O
2
3:
0–100 ppm O
2
4:
0–1000 ppm O
2
5:
0–1 % O
2
6:
0–25 % O
2
Accuracy:
±2% of full scale when calibrated and operated at the same constant
temperature and pressure.*
±5% of full scale over the operating temperature range once tempera-
ture equilibrium is reached.*
*
Additional 0.04 ppm on 0-1 ppm range, generated by internal scrub-
ber (which is necessary to maintain these specifications).
Response Time: 90 % of final reading in less than 61 seconds at 25 °C
Operating Temperature:0-50°C (32
-122 °F)
Analog Signal Outputs:
For percent of full scale indication:
one 0–1 V dc non-isolated signal
one 4–20 mA dc isolated signal
For range identification:
one 0–1 V dc non-isolated signal
one 4–20 mA dc isolated signal
Digital Data Lines:
One RS-232C serial interface for 2-way communications
with separate host computer—for remote monitoring and
control of all functions.
Alarms:
Five user-programmable absolute-reading alarm setpoints,
with Form C, SPDT relays (3A resistive).