Teledyne 3160 - Manual (Page 47)

4-19
Operations 4 Operations 4 Operations 4 Operations 4 Operations 4
TELEDYNE ANALYTICAL INSTRUMENTS
1. Enter set-up from the Analyze mode by pressing
SETUP.
2. Press SET to set the clock functions.
(If only one cell block is installed, TEST and INSTL
will be omitted.)
3. Enter the authorization code by using the SELEC, UP
and DOWN keys, and press ACCPT.
4. Press MORE.
5. Press CLOCK to select clock functions.
6. Enter the function that you would like to change.
SET: Sets the time.
ZERO: Sets the time for the next zero and the inter-
val times for automatic zeroing.
SPAN: Sets the time for the next span and interval
times for automatic spanning.
ALRMS: Displays alarm times and dates.
Set-Up Clock Functions Set-Up Clock Functions Set-Up Clock Functions Set-Up Clock Functions Set-Up Clock Functions