Toshiba TDP-TW420 - Manual (Page 34)

66 67
Netw
ork and
USB memor
y
3 Click on the Advanced button.
The Movie fi le: Advanced Settings dialog
appears. Set the dialog as shown below, as
necessary.
Interruption
Check the No Interruptions checkbox to
prevent other computers from interrupting the
projector, for example, during presentation.
Transmission Mode (Sound)
Check the Transmit sound to a projector
(Only when connected with one projector)
checkbox to transmit the sound being played on
a computer to the projector.
Autostart
Check the Start playing the fi le automatically
when starting transmission checkbox to
automatically start playing the video fi le when
connecting to the projector.
Repeat
Check the Play repeatedly after the end of playing checkbox to automatically
repeat from the beginning when the fi le reaches the end.
4 Click on the Browse button and
select the fi le to send.
Clicking on the Browse button displays the Open
dialog box. Select the fi le to send then click on the
Open button.
The selected fi le is added to the pull-down list in
the Network Utility’s Select fi le fi eld.
5 Select the fi le to send from the pull-
down list of the Transmission File
fi eld.
Click on the Transmission File fi eld’s button to display
the pull-down list. Select the fi le to send from this list.
A thumbnail of the selected fi le appears in the
Preview box. The fi le displayed here will be
transmitted.
Step 4 can be skipped.
The way that drag and drop the fi le to send from the desktop or Windows Explorer into
the Preview box is also available. In this case as well, the selected fi le is added to the
pull-down list.
Note
You may not select a fi le by drag and drop with Windows Vista ® .
•
•
•
•
•
Using the Network Utility (Continued)
6 Select the projector to transmit to.
The IDs of projectors accessible for transmission
will be listed. (If projector name has been set up
already, it is shown.) Select the checkbox of the
projector to be transmitted to from this list. Then
icon
is displayed on the projector's screen for
few seconds.
It is possible to select only one projector.
7 Click on the button.
The selected fi le's image is displayed by the projector and the Control window appears
as well.
8 Play the video fi le via the Control window.
The function of each button and box is as follows:
Current position: Indicates the playing position. Dragging the slider can move the
playing position.
Play: Starts playing the video fi le.
Freeze: The picture is paused.
Stop: Stops playing the video fi le.
Volume: Adjusts sound volume.
Mute: Cuts off picture and sound.
Release mute: Restores picture and sound.
Notes
Only one fi le can be sent at a time. To send another fi le, repeat steps 5 and 7 .
MPEG/AVI/ASF/WMV fi les can be transmitted.
The update speed of the transmitted fi le depends on your computer's performance and
the surrounding radio environment.
The projector ID is the MAC address of the wired LAN mounted on the projector.
The audio signals transmitted by a computer become mono.
Playing contents protected by copyright is not supported.
•
•
•
•
•
•